- 1. Inspect spare tyre for:
A) Ignore
B) Decoration
C) Cracks, dry rot, damage
D) Paint - 2. Replace spare tyre if:
A) Ignore
B) Decoration
C) Old or damaged, even if unused
D) Paint - 3. Temporary spare tyre should:
A) Ignore
B) Decoration
C) Not exceed speed or distance limit
D) Paint - 4. Heavy load with compact spare should be:
A) Ignore
B) Decoration
C) Avoided
D) Paint - 5. Always replace temporary spare with regular tyre:
A) Ignore
B) Decoration
C) As soon as possible
D) Paint - 6. Jumpstart cables are:
A) Decoration
B) Ignore
C) Heavy insulated wires with metal clamps at each end
D) Paint - 7. Purpose of jumpstart cables:
A) Decoration
B) Ignore
C) Transfer electrical power from working battery to dead battery
D) Paint - 8. Jumpstart cables used when:
A) Decoration
B) Ignore
C) Battery is weak or dead
D) Paint - 9. Red cable indicates:
A) Ignore
B) Negative
C) Positive (+)
D) Paint - 10. Black cable indicates:
A) Ignore
B) Positive
C) Negative (–)
D) Paint - 11. Metal clamps in jumpstart cables are used to:
A) Decoration
B) Ignore
C) Attach to battery terminals or grounding points
D) Paint - 12. Vehicles during jumpstarting should:
A) Ignore
B) Decoration
C) Not touch each other while connecting cables
D) Paint - 13. Check Tthe batteries before jumpstarting for:
A) Ignore
B) Decoration
C) Cracks, leaks, or swelling; do NOT jumpstart if damaged
D) Paint - 14. During jumpstarting, keep cables away from:
A) Fans, belts, and moving engine parts
B) Ignore
C) Decoration
D) Paint - 15. During jumpstarting, remove:
A) Ignore
B) Decoration
C) Any metal jewelry to avoid sparks
D) Paint - 16. During jumpstarting, ensure correct:
A) Ignore
B) Decoration
C) Terminal connection; wrong connections can damage electronics
D) Paint - 17. During jumpstarting, where do you connect the red clamp?
A) Ignore
B) Dead battery positive (+)
C) Good battery positive (+)
D) Paint - 18. During jumpstarting, where do you connect the black clamp:
A) Ignore
B) Dead battery negative (–)
C) Unpainted metal on dead vehicle (engine bracket or chassis)
D) Paint - 19. How do we start the working vehicle during jumpstarting?
A) Decoration
B) Ignore
C) Let it run 2–3 minutes before starting dead vehicle
D) Paint - 20. During jumpstarting, if vehicle does not start:
A) Ignore
B) Decoration
C) Wait a few more minutes and try again
D) Paint - 21. What is the first step in removing cables after jumpstarting?
A) Ignore
B) Remove red clamp from dead battery (+)
C) Remove black clamp from chassis
D) Paint - 22. What is the second step in removing cables after jumpstarting?
A) Ignore
B) Remove black clamp from good battery (–)
C) Decoration
D) Paint - 23. What is the third step in removing cables after jumpstarting?:
A) Ignore
B) Decoration
C) Remove red clamp from good battery (+)
D) Paint - 24. What is the fourth step in removing cables after jumpstarting?
A) Ignore
B) Decoration
C) Remove red clamp from dead battery (+)
D) Paint - 25. After jumpstart, keep revived vehicle running for:
A) Ignore
B) Decoration
C) At least 20–30 minutes
D) Paint - 26. If vehicle dies again shortly after jumpstart:
A) Decoration
B) Ignore
C) Battery or alternator may need replacement
D) Paint - 27. A Common mistake during jumpstarting is connecting positive to:
A) Ignore
B) Decoration
C) Negative
D) Paint - 28. A Common mistake during jumpstarting is touching clamps together:
A) Ignore
B) Decoration
C) After connection
D) Paint - 29. Jumpstarting hybrid/electric vehicles:
A) Ignore
B) Decoration
C) Requires special procedures
D) Paint - 30. Jumpstarting from a small motorcycle battery:
A) Ignore
B) Decoration
C) Should be avoided
D) Paint
Ntsa Driving Test
