Driving Test Questions 355
When should you signal when approaching a roundabout to turn right?
A. Only after entering
B. Before entering and maintain signal until you pass the exit before yours
C. Do not signal
D. Use hazard lights
When exiting a roundabout after turning right, when should you change signal?
A. Never
B. After passing the previous exit, signal left to indicate you are leaving
C. Immediately after entering
D. After stopping
What should you do when traffic is queuing across a junction?
A. Join queue in middle
B. Wait before the junction until there is space beyond it
C. Honk continuously
D. Drive onto sidewalk
When turning right across oncoming traffic, where should you position your vehicle while waiting?
A. Behind the stop line
B. Move forward into the junction while keeping wheels straight until safe to turn
C. Block pedestrian crossing
D. Reverse
When is it acceptable to overtake on the left at a junction?
A. Always
B. Only when the vehicle ahead is turning right and there is space to pass safely
C. Never
D. Only at night
At a junction controlled by a stop sign and a give-way sign on different roads, who has priority?
A. Both equal
B. Vehicles on the road with the give-way sign have priority over those with stop sign
C. Vehicles with stop sign
D. Pedestrians only
When turning into a narrow street with parked vehicles, what should you do?
A. Enter quickly
B. Slow down and be prepared to stop if another vehicle is coming out
C. Honk continuously
D. Drive in middle
At a pedestrian refuge island, what does it indicate?
A. A parking place
B. A safe place where pedestrians can stop while crossing in stages
C. A bus stop
D. A no-entry zone
When approaching a roundabout with heavy traffic already circulating, what should you do?
A. Force entry
B. Wait for a safe gap before entering
C. Honk continuously
D. Enter and stop inside
When leaving a minor road to join a major road with fast-moving traffic, what is the safest method?
A. Accelerate blindly
B. Wait for a sufficient gap and merge smoothly without forcing others to brake
C. Honk and enter
D. Close your eyes briefly
When approaching a crossroads with no signs, what is the general rule?
A. Vehicles on the left have priority
B. Give way to vehicles coming from the right
C. The fastest vehicle goes first
D. Pedestrians only have priority
When turning right at night, what extra precaution should you take?
A. Turn without signals
B. Ensure your indicators are clearly visible and judge speed of oncoming headlights carefully
C. Turn off headlights
D. Accelerate into turn
When waiting to turn right and traffic behind begins to honk, what should you do?
A. Turn immediately
B. Wait until it is safe; ignore pressure from other drivers
C. Reverse
D. Move into wrong lane
At a junction with road markings indicating a box junction, what is the rule?
A. Stop inside if traffic stops
B. Do not enter unless your exit is clear
C. Park inside
D. Honk continuously
When turning left at a green light but pedestrians are still crossing, what should you do?
A. Drive through them
B. Wait until pedestrians have fully crossed before turning
C. Honk to make them run
D. Turn around them
When two vehicles approach a narrow bridge from opposite directions and there are no signs, what should happen?
A. Both enter at once
B. The driver who can stop safely should give way to the other
C. Larger vehicle goes first
D. Faster vehicle goes first
At a junction, why should you avoid stopping on pedestrian crossings?
A. It wastes time
B. It obstructs pedestrians and is illegal
C. It blocks your view only
D. It damages tires
When approaching a junction with a faded stop line, what should you do?
A. Ignore line
B. Stop where the line would normally be before entering the junction
C. Stop in middle
D. Accelerate
When traffic is being manually directed around road works at a junction, what should you do?
A. Ignore the worker
B. Follow the directions given by authorized personnel
C. Follow traffic lights only
D. Honk continuously
When turning right across a cycle lane, what should you do?
A. Ignore cyclists
B. Check mirrors and blind spots and give way to cyclists before crossing the lane
C. Accelerate across quickly
D. Stop in the cycle lane
What is the main danger of overloading a vehicle?
A. Improved stability
B. Reduced braking efficiency and increased risk of mechanical failure
C. Better fuel economy
D. Faster acceleration
What should you check before towing a trailer?
A. Only tire pressure
B. That the trailer is properly coupled, secured, and lights are working
C. Only mirrors
D. Only fuel level
What is the legal requirement for a trailer’s braking system?
A. No brakes required
B. Heavier trailers must have an independent braking system
C. Brakes only on one wheel
D. Brakes only for downhill driving
What should you do if your vehicle begins to sway while towing a trailer?
A. Accelerate to stabilize
B. Slow down gradually without sudden steering movements
C. Brake sharply
D. Turn the steering wheel quickly
What is the maximum safe load height on a vehicle?
A. As high as possible
B. Within legal height limits and stable enough to prevent tipping
C. Twice the vehicle height
D. No restrictions
Why must loads be evenly distributed on a vehicle?
A. To reduce paint damage
B. To maintain vehicle balance and proper handling
C. To increase speed
D. To reduce driver fatigue only
What should you do if part of your load extends beyond the rear of your vehicle?
A. Ignore it
B. Mark it clearly with a red flag or reflective warning device
C. Cover it with plastic
D. Paint it black
What is the main danger of unsecured cargo?
A. It increases fuel use
B. It can fall off and cause accidents or injury
C. It improves braking
D. It reduces tire wear
When transporting hazardous materials, what must you display on the vehicle?
A. Decorative stickers
B. Appropriate hazard warning signs or placards
C. Only company logo
D. Music system warning
What should you do if hazardous material leaks from your vehicle?
A. Continue driving
B. Stop immediately in a safe place and alert emergency services
C. Cover with sand and leave
D. Ignore the leak