Ntsa Driving Test
Ntsa Driving Test 105
- 1. Spare tyre location is usually:
A) Roof
B) Engine
C) Trunk or under cargo area
D) Front bumper - 2. Some SUVs and trucks have spare tyres:
A) Inside engine
B) Under seats
C) Mounted outside at the rear
D) On mirrors - 3. Spare tyre should be:
A) Hidden
B) Ignored
C) Easily accessible in emergencies
D) Loose - 4. What is the first step when using spare tyre:
A) Jack up vehicle immediately
B) Remove spare
C) Pull over safely, switch on hazard lights, engage handbrake
D) Loosen tyres - 5. What should we do first when removing damaged tyre?
A) Replace spare
B) Jack up
C) Loosen lug nuts
D) Inflate tyre - 6. What is the first step when installing a spare tyre?
A) Tighten nuts fully
B) Lower vehicle
C) Place spare on hub, tighten lug nuts partially
D) Drive - 7. After lowering vehicle:
A) Ignore
B) Remove jack
C) Fully tighten nuts in crisscross pattern
D) Inflate - 8. Check spare tyre to:
A) Ignore
B) Remove
C) Ensure sufficient air before driving
D) Place in trunk - 9. How often should a driver check air pressure?
A) Never
B) Weekly only
C) At least once a month
D) Daily - 10. Inspect spare tyre for:
A) Decoration
B) Cracks, dry rot, or damage
C) Colour
D) Size - 11. Know vehicle’s spare tyre:
A) Ignore
B) Specifications
C) Colour
D) Brand - 12. Replace spare tyre if:
A) Old or damaged
B) Never used
C) Even if unused, if old or damaged
D) Decoration - 13. What should a driver do to ensure a temporary spare wheel safety?
A) Overload vehicle
B) Drive at high speed
C) Do not exceed speed or distance limit
D) Decoration - 14. Avoid heavy loads when using:
A) Full-size spare
B) Compact spare
C) Run-flat
D) Tyre pump - 15. Always replace temporary spare with:
A) Another temporary
B) Regular tyre as soon as possible
C) Smaller spare
D) Inflated tyre - 16. Jumpstart (booster) cables are:
A) Decoration
B) Heavy insulated wires with metal clamps to transfer power from working to dead battery
C) Tyre repair tool
D) Reflector triangle - 17. Purpose of jumpstart cables is when the battery is:
A) Full
B) Weak or dead
C) Inflated
D) Flat tyre - 18. Jumpstart cables supply:
A) Fuel
B) Water
C) Temporary power to start engine
D) Fire - 19. What drains the car battery power?
A) Wipers
B) Fire
C) Cold weather, leaving lights on, old battery
D) Tyre repair - 20. Red cable indicates:
A) Negative
B) Insulated wire
C) Positive (+)
D) Ground - 21. Black cable indicates:
A) Positive
B) Insulated wire
C) Negative (–)
D) Battery - 22. What are metal clamps for:
A) Decoration
B) Attaching to battery terminals or grounding points
C) Inflators
D) Tyre spanner - 23. Vehicles should be________when jumpstarting
A) Moving
B) Turned off before connecting
C) On high speed
D) Decoration - 24. Vehicles must not_________when jumpstarting
A) Turn off
B) Honk
C) Touch each other
D) Decorate - 25. All drivers must check batteries for________before jumpstarting.
A) Colour
B) Size
C) Cracks, leaks, or swelling; do NOT jumpstart if damaged
D) Brand - 26. Keep cables away from:
A) Trunk
B) Fans, belts, and moving engine parts
C) Seat
D) Decoration - 27. When jumpstarting, drivers should remove metal jewelry to:
A) Decorate
B) Avoid risk of sparks
C) Repair battery
D) Inflate tyres - 28. Why should drivers ensure correct terminal connection when jumpstarting?
A) Decoration
B) Tyre repair
C) Wrong connections can damage electronics
D) Fire - 29. What should drivers do first when connecting jumpstart cables?
A) Black clamp dead battery
B) Black clamp good battery
C) Red clamp dead battery positive (+)
D) Red clamp good battery - 30. What should drivers do next ? Connect red clamp to:
A) Negative
B) Chassis
C) Good battery positive (+)
D) Engine only